background image

IMPORTANT INSTRUCTIONS TO THE INSTALLER:

PLEASE READ THESE INSTRUCTIONS, FILL IN THE BLANKS BELOW,

THEN PROVIDE THE INSTRUCTIONS TO THE USER BY SECURELY

TAPING THEM TO THE FLOW HANDLE OR THE ESCUTCHEON.

WARNING: Risk of scalding

Varying the calibration of this thermostatic valve to increase water 
temperature increases the risk of injury from scalding. The installer is 
responsible for installing the valve and any recalibration of the water 
temperature in accordance with the instructions.

CAUTION:  Danger of scald injury. Valve can be recalibrated to 

provide higher temperature water.

This valve has been preset at the factory to provide a range of water
temperatures. Any change in settings or water inlet conditions from
those used during calibration at the factory may raise the outlet
temperature and may cause scalding. The responsibility for the
proper installation and any recalibration of this valve lies with the
installer.

TWO HANDLE THERMOSTATIC TUB/SHOWER FAUCET

T3428, T3428CP, T3428CPM, T3428STV, T3428NLBL, T3428CGPC,
T3428CGSA, T3429, T3429CP, T3429CPM, T3429STV, 3429NLBL, 
T3429CGPC, T3429CGSA, T3431, T3431CP, T3431CPM, T3431STV,
T3431NLBL, T3431CGC, T3134CGSA

ENGLISH

INS235A

THIS THERMOSTATIC VALVE HAS BEEN PRESET

BY

OF 

TO A MAXIMUM WATER DISCHARGE TEMPERATURE OF

______ºF. ANY CHANGE TO THIS SETTING MAY RAISE THE 

DISCHARGE TEMPERATURE AND COULD CAUSE SCALDING.

DATE:__________

!

Complies with: ASME A112.18.1M, CSA B125, & ASSE 1016

Содержание 3429NLBL





















Отзывы: