7
Safety
It is recommended to carefully read the instructions and warnings in this manual book before
operating the appliance. The information in the manual book is fundamental for the safety of the
use and for maintenance.
Keep this manual carefully. The electric plant has been designed in compliance with the IEC EN
60335-2-89 and EN 60335-1 standard.
Special adhesive is required around the mains voltage area to prevent the risk of electricity.
Before the connection, ensure the presence of an omni polar switch with minimum contacts
opening minimum of 3mm in the mains power supply upstream from the appliance.
In the design and construction phase, the manufacturer has paid particular attention to the aspects
that can cause risks to safety and health of persons that interact with the appliance.
Read and follow the instructions in the manual book carefully.
Don’t tamper or eliminate the installed safety devices.
Failure to comply with this requisite can lead to serious risks for personal health and safety.
It is recommended to simulate some test maneuvers to identify the controls, in particular those relative to switch-on
and switch-off and their main functions.
The appliance is only destined for the use for which it has been designed; any other use must be considered
improper.
The manufacturer declines all liability for any damage to objects or injury to persons owing to
improper or incorrect use.
All maintenance interventions that require precise technical skill or particular abili ty must be
performed exclusively by authorized technicians.
When using the appliance, never obstruct the air inlet when the appliance is on, so as not to
compromise its performance and safety.
Do not stretch the power cable.
In order to guarantee hygiene and protect the food stuffs from contamination, the elements that come into direct or
Part 4: How to Use
