11
Display
Temperature.
Timer or insert probe.
Alarm and status icons.
If an icon or LED is on, the correspondent function is enabled.
If an icon or LED is flashing, the correspondent function is delayed.
Buttonboard in stand-by
How to select a cycle
:
Push and release the (3)
button until the desired cycle is selected.
How to start a cycle
:
Push and release the (2) START/STOP
button. The correspondent yellow LED is switched on.
How to temporarily stop the running cycle:
1. Press and release the
button.
2. The compressor and the fan will be stopped for the PAU time (see parameters list)
and the flashing message “Stb” will be displayed.
To restart the cycle press and release the
button, the cycle will restart
from the some point at which it was interrupted.
In any case the cycle automatically restarts after the PAU time.
How to stop a cycle
:
Hold pushed the (2) START/STOP
button until the yellow LED will be switched off.
How to set the time (RTC)
Hold pushed the (5)
DOWN
button
until the Min label is displayed.
Use the
UP
and
DOWN
button to browse the parameters.
To modify:
push the
SET
button and then the UP and DOWN button.
To confirm
: push the
SET
button.
To exit the RTC menu:
Push together SET + UP buttons or wait 5 sec.
