74
75
Global
To access the Global Settings page, you can press number ‘5’ on the keypad: the screen will
show you the 3 available parameters.
1. Tune:
Add a global tune offset for the whole synth.
2. PageSwitch:
the Modal 002R display is context sensitive: this means that the parameter
associated to any encoder touched by the user is immediately displayed. You can disable
this option by turning the value of this PageSwitch option off.
3. Brightness:
This parameter controls the LCD screen brightness.
4. Seq Link:
This parameter sets the behaviour of linked-sequence loading whilst the
sequencer is active. When ‘Seq Link’ is set to off it disables linked sequence loading whilst
the sequencer is playing - this allows you to preview the same sequence with different
patches. Else the linked sequence is loaded on every patch load, regardless of the playing
state of the sequencer.
5. AutoLoad:
This parameter enables Patches / Sequences / Animations after a short pause
to be loaded without needing to press Select to confirm.
6. OscTune:
This page allows you to adjust the tuning of each oscillator individually, for
each voice. A value of +64 is 1 semitone up, -64 is 1 semitone down. Whilst you have
selected an oscillator on the LCD tuning settings page, only that oscillator will play.
Remote Support
This feature allows you to get remote technical support from the Modal Electronics team: this
means that a Modal operator can connect to your unit in order to diagnose and fix potential
problems.
If you have any issues with your 002R then you can contact us at:
[email protected]
+44 (0) 117 214 0400
We will get back in touch and supply you with a 10 digit access code that will allow us to
access your synthesiser remotely. The code can be entered with either the keypad or using the
on screen controls. When the code has been entered then navigate to and press DONE.
