Mobotix D25M, Руководство пользователя

Страница: 59 / 140

59
/140
Mounting The Camera Without Accessories
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
2.2.3 Procedure For D25M IT/Secure
1. Install and prepare
the network connection
2. Install the flush-mounted socket: The pre-installed cable attached to the camera
must be connected with the on-site network cable. For installation without acces-
sories, a flush-mounted socket must be installed first to provide space for the con-
nection. The cabling is now perfectly protected and cannot be seen or accessed
from the outside. The camera cannot be mounted directly on top of protruding,
surface-mounted sockets. Use the supplied camera drilling template (fold-out at
the end of this manual) to mark the position of the flush-mounted socket for the
desired camera position.
3.
Drill the holes:
Drill the holes for the supplied screw anchors (see drilling template).
4. Connect the cable: Connect the on-site network cable to the camera patch cable
using a standard connector.
5. Attach the camera: Use the (included) screws to affix the mounting ring and the
camera at the designated position.
6. The outer shell is required at a later stage in the installation and is attached only
when the dome has been removed and placed back after a lens adjustment.
7. Proceed to Section 3.3.1, «Aiming and Adjusting The Lens».