114
/140
D25M Camera Manual: Operating the Camera
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
3.3 Adjusting Lens Focus And Correcting Lens Distortion
3.3.1 Aiming and Adjusting The Lens
Make sure that you see the live image of the camera on the monitor of your computer or
laptop. Now adjust the lens mount until you see the desired image area on your monitor:
•
Remove the camera dome.
Use the supplied plastic foil
or a cotton cloth to remove the dome by turning it in a
counter-clockwise direction. With IT/Secure models, you
may have to remove the outer shell first.
•
Loosen the toothed ring slightly
by turning it in a counter-
clockwise direction using the supplied hook wrench. In
addition,
loosen
the two
Allen screws
on both sides of the
lens mount slightly by turning them in a counter-clockwise
direction using the supplied Allen wrench.
Loosen the ring and screws until you are still able to pan
and rotate the internal part of the camera with the lens
without much force but not so far that the lens is unable
to move on its own.
• Now
aim the camera
by rotating and panning the lens
mount (Note: the MicroSD card slot must point downward
for the camera’s live image to be displayed properly). Never
use force when adjusting the direction of the camera, as
this could damage the camera beyond repair.
Содержание D25M
Страница 9: ...9 140 MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com ...
Страница 137: ...137 140 Additional Notes MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com Notes ...
Страница 138: ...138 140 D25M Camera Manual MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com Notes ...
