Mobotix D25M, Руководство пользователя

Страница: 96 / 140

96
/140
D25M Camera Manual: Operating the Camera
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
3 OPERATING THE CAMERA
3.1 Manual And Automatic Operation - Overview
MOBOTIX cameras do not require any extra software. Thus, you can set up and operate the
MOBOTIX camera using a JavaScript-enabled browser on all common operating systems
(such as Window, Linux, Macintosh, etc.). As an alternative, you can also use the MOBOTIX
applications MxControlCenter and MxEasy. Follow these steps to set up the camera:
1. Connect the camera to the network. Power is supplied directly via the network
cable (see Section 2.1.3)
2.
Set up the camera's network parameters:
– Manually using a web browser (see Section 3.2.1, then Section 3.2.2)
–
Automatically using MxControlCenter/MxEasy
(see
Section 3.2.3 and 3.2.4) or
via DHCP
(see Section 3.2.6)
3.
Configure the camera
using the browser-based user interface.
Every MOBOTIX camera comes preconfigured with a fixed IP address in the 10.x.x.x range
(e.g.
10.8.0.99
). However, local computer networks usually have IP addresses in the
172 or 192 ranges. In order to access a MOBOTIX camera via the network, the camera
needs to obtain an IP address in the same address range. You can
set up the network
parameters of the MOBOTIX camera using one of the following methods : Manually ,
using
MxCC
and
MxEasy
or by
DHCP
.
Camera software
in the browser
Download the MxEasy
and MxControlCenter
software for free at
www.mobotix.com