67
/126
Mounting The Corner And Pole Mount
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
Mounting To The Corner Of A Building
2.5.2
Use the
supplied screw anchors, screws and washers
to affix the Corner and Pole Mount
to a building corner.
Mark the
1.
four screw anchor holes
on the corner
of the building. Make sure that the arrows on the
mount are pointing upwards. Drill the holes with
a 10-mm drill bit.
Guide the
2.
connection cables
through one of
the large round holes at the back of the Corner
and Pole Mount and then through one of the
two 16-mm holes on the front of the mount.
In order to properly
protect the cabling
, you
should let the cabling run from the inside of the
building through the Corner and Pole Mount
directly into the camera.
Note: The cable to
the camera should be at least 80 cm (32 in)
from the corner!
Insert the
3.
supplied
10-mm screw anchors
into the screw anchor holes and secure
the Corner and Pole Mount to the corner of the building using the
8x70 screws
and
washers (dia. 9 mm)
.
Attach the
Outdoor Wall Mount to the Corner and Pole Mount
as described in Section 2.5.4.
Make sure that the
arrows are pointing
upwards when mounting
Make sure not to
pinch and damage the
cables when mounting
Содержание D14D
Страница 71: ...71 126 Adjusting The Lens MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...
Страница 124: ...124 126 MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com D14D Camera Manual Notes...
Страница 125: ...125 126 MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...