55
/126
First Installation Steps
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
Connecting ethernet Cable With The PatchBox
2.3.3
The MOBOTIX
Outdoor PatchBox
enables you to connect a
MOBOTIX camera with a
patch cable
or with an
ethernet
installation cable
simply and water-resistant for the following
cases:
Outdoor installation (preferably using the
•
Outdoor Wall
Mount
)
Indoor installation with Ethernet installation cable
•
You will find additional information on the MOBOTIX Outdoor
PatchBox at
www.mobotix.com
under the section
Products >
Accessories > Functional Boxes
.
Connecting The Mini USB Cable
2.3.4
Existing additional modules like the MOBOTIX ExtIO (USB) can be connected via the Mini
USB connector.
remove the outer shell
1.
: Remove the outer shell using
the supplied custom tool. Insert the tip of the custom
tool into the three small holes of the shell, one by one.
Lift the outer shell to loosen it from the fixtures.
Remove cable cover
2.
: Remove the two M4x25 Allen
screws from the cable cover using the 3-mm Allen
wrench.
Remove cable cover
3.
: Remove the two M4x25 Allen
screws from the cable cover using the 3-mm Allen
wrench.
Remove rubber plug
4.
: Carefully bend the cable guide
upwards and remove the rubber plug. Keep the rubber
plug in a safe place (ideally in the camera’s original
packaging).
Use the supplied
custom tool
Содержание D14D
Страница 71: ...71 126 Adjusting The Lens MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...
Страница 124: ...124 126 MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com D14D Camera Manual Notes...
Страница 125: ...125 126 MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...