Mobeye CMVXI-R, Руководство пользователя

Страница: 20 / 28

19
The unit will recognize this number and store it as administrator (TEL1). The
administrator will receive a confirmation SMS text message including the security
code. This code is needed to program the other settings in the unit.
NB: For this way of programming the number recognition in the administra
tor’s
phone must b
e ‘on’. To program or change the administrator’s number by SMS
command, please refer to the next section.
7.3 PROGRAMMING THE SETTINGS BY SMS
When using your own SIM card, all settings are programmed in by SMS text
messages:
1. Make sure the Outdoor Detector is in program mode (please refer to 7.1).
2. Send an SMS text message with the (security) code and the command.
3. The green LED blinks 3 times to indicate the successful configuration. In case
of an incorrect command, the red LED flashes 5 times.
SMS messages have the following content:
CODE COMMAND:OPTION
Example: 1111 TEL1:+44772345678
- CODE stands for the security code, factory setting is 1111.
- Do not forget the space character between (security) code and command.
- The commands are case insensitive.
- Several commands may be combined in one SMS message (with a maximum
of 160 characters) by placing a # between the commands.
CODE COMMAND:OPTION#COMMAND:OPTION#COMMAND:OPTION
- All settings are saved and remain saved, even if the batteries are removed.
In chapter 5 the options are explained.
In chapter 8.1 all possible SMS commands are listed.