Mobeye CMVXI-R, Руководство пользователя

Страница: 14 / 28

13
4.10 SYSTEM RESET
To reset a Mobeye Outdoor Detector two steps are necessary, in following
sequence:
1. Delete the Mobeye Outdoor Detector from the Mobeye Internet Portal
2. Reset the Mobeye Outdoor Detector
1. To delete the Mobeye Outdoor Detector from the Mobeye Internet Portal
Go to "Device Settings" and click on the delete icon in the "Device" block. Then
confirm your choice.
2. To reset the Mobeye Outdoor Detector to its factory settings
1. Remove the batteries and, if relevant, disconnect the battery pack.
2. Keep (an enrolled) tag against the outside button while reinserting the batteries.
Keep it pressed for (about) another 5 seconds.
3. Release the tag immediately after the LED starts to flash.
4. If relevant, connect the battery pack.
After a successful reset, the status LED will blink green to indicate that the module is
not configured. The security code is back to factory settings as well.
The SIM card is now disconnected and is visible on the "Add device" screen. The
SIM card can be used again in another (or the same) Mobeye device in combination
with the portal.