Mobeye CMVXI-R, Руководство пользователя

Страница: 18 / 28

17
6. ENROLMENT OF NEW TAGS
Tags are used for switching on and off and to enter the program mode. The supplied
tags are already enrolled and therefore ready-to-use. If additional tags are provided,
they must be enrolled by the user. To enrol a new tag, the Mobeye Outside detector
should
be in program mode (see chapter 7).
Once in program mode, send following SMS command to the unit to reach the
enrolment mode:
SMS command to switch to the tag enrolment mode:
CODE TAG
example: 1111 TAG
mind the space between the installation code and TAG
A short melody confirms the correct command and indicates the tag enrolment
mode.
Now hold a new tag to the tag reader at the bottom of the detector. The detector
confirms the successful enrolment of the new tag by beeps. The number of beeps
represents the tag number (the first tag beeps once, the second tag twice, etc.). If a
tag was enrolled before, the beeps will sound to indicate the tag number; it will not
re-enrol.
The detector leaves the enrolment mode if no tag was hold against the tag reader for
15 seconds.
In total 25 tags can be enrolled to the CMVXI-R. The same tags will function in
combination with other CMVXI-R Outdoor Alarm systems, which makes it possible to
operate several devices with one tag.