Mobeye CMVXI-R, Руководство пользователя

Страница: 10 / 28

9
4.3 ENTER THE PROGRAM MODE
To activate the unit in the portal, the GSM module needs to be open and connected
to the network.
The Mobeye Outdoor Detector switches to the program mode after placing the
batteries. First the GSM module establishes network connection. During this time the
outdoor LED in the tag reader flashes green and red. Within 10-30 seconds the
connection is established. The LED starts blinking fast followed by flashing 1 sec.
on/1 sec. off (or stays on continuously in case the unit has been configured yet).
It also goes to the program mode by keeping the tag to the tag reader for 5 seconds,
until the outside LED starts flashing red/green. Once it has GSM connection it will be
flashing again (or stays on continuously).
During the first 3 minutes the GSM module remains active, ready to be activated in
the portal. After 3 minutes a time-out occurs and the GSM module switches off in
order to save the batteries.
4.4 ACTIVATE THE DEVICE IN THE PORTAL
If the LED in the tag reader flashes once per second, you activate the device in the
Mobeye Internet Portal by clicking ‘Activate device’, which is written behind the
registered SIM card.
On the pop-up screen, enter the security code "1111" (factory code). The unit will
receive a message from the portal and the data exchange is started. The next
screen asks for a name and location for your device. These fields can be changed
later.
Once the activation is completed, the new device is visible on the dashboard.
By clicking the name, the detail page will be opened.
Contract
SIM card + portal
“Monitoring”
SIM card telephone number
Nam Location Status Communication
Mobeye Alarm Unit Main Street 1, London
√