®
!¼l!¼l©@OO
Standard Guest Paging System User Manual
2.2 Staff Paging
Staff paging interface as picture 2.3, press 'F1 ' to switch
staff/guest interface.
Picture 2.3 Staff Paging Interface
<Scali> means staff paging interface, 12:07 is time, NUM
means to input number, the paging method is the same as guest
paging. Press ENT to input additional messages for staff pager, as
picture 2.4.
Picture 2.4 Staff Paging Message Input Interface
MEG: Maximum 12 digital message, press SEND, the message
will send to certain pager receiver.
Under staff paging interface, input O in NUM, and press SEND,
all the pagers can be paged.
Notes: For this function, the staff pager second ID has to be
setup and it has to be the same as staff group paging ID.
6------------------------
Standard Guest Paging System User Manual
2.3 Single Key Paging
Press F3 to enter single key paging interface, as picture 2.5.
Use upper and lower key to check and read the single key
message, input 0-9 to page the corresponding waiter/staff pager.
Notes: Single key paging can only page the staff/waiter
number but not the guest number.
Picture2.5 Single Key Paging
<Ocall> means one key paging, 12:33 is the time, O is the
single key number, 010 is the waiter/staff number, after - is the
preprogrammed message content. Input O and press SEND, then
the message under single key O will be sent.
2.4 Edit Bill No.
Press F2 to enter Bill No. edit interface. Bill No. paging is just
for guest paging and its corresponding bill No., staff paging can
not be used, as picture 2.6.
Picture 2.6 Edit Bill No. Interface
------------------------7
