MMcall MMC-T10, Руководство пользователя

Страница: 14 / 23

®
Q:JQ:J©@OO
Standard Guest Paging System User Manual
2. Setup Interval Time for Ring
T:_s is the ring time interval, unit is second, maximum 99s,
this function will only work when N is setup as 0.
3. Setup Ring Method
W: _is different ring choices, press upper/lower key to
switch(vibration, ring and shine),# is to switch on/off this
function.
M-ON Turn on vibration
M-OF Turn off vibration
R-ON Turn on ring
R-OF Turn off ring
L-ON Turn on light shine
L-OF Turn off light shine
Notes: If all the setup is OFF, after the coaster receives
message, the alert method will be default as all is ON.
Press ENT to save setup information.
2.5.6 Repage Setup
In repage setup interface, repage times and time interval for
the transmitter can be setup, coaster setup as picture 2.13.
Picture 2.13 Repage Setup
1.Setup repage times
N: _means repage times, maximum 9, 0 means no repage,
use keypad 0-9 to modify the repage times, use left/right key
to move the cursor.
2.Setup repage time interval
12------------------------
®
Q:JQ:J©@OO
Standard Guest Paging System User Manual
T: _s means repage time interval, maximum 99s, 1s is
recommended to be used. While the time interval for queuing
paging is the same as this time interval setup. Use keypad 0-9
to modify the times, use left/right key to move the cursor.
After modification, press ENT to save the information.
2.5.7 Check Program Version
As picture 2.14, press ENT to enter the interface, press
ESC to exit.
Picture 2.14 Check Program Version
2.6 Project Setup
Warn: Non professional staff please be careful about this
operation, otherwise it may effect the use for the whole
system.
Project setup list as Table 2.2
Table 2.2 Project Setup List
1.EditGroupGID Edit guest group paging ID
2.EditGroupSID Edit staff group paging ID
3.EditGuest ID Edit guest pager No. &ID
4.EditStaff ID Edit staff pager No.& ID
5.Edit Okey ID Edit single key paging
6.Edit Message
Edit common message
(currently can not be used)
------------------------13