MMcall MMC-T10, Руководство пользователя

Страница: 10 / 23

®
!¼l!¼l©@OO
Standard Guest Paging System User Manual
<Eorder> means bill No. paging, 00 is serial number, 010 is
coaster pager number, the four digit after -# is the bill number, and
the bill number has to be four digit.
1. Edit bill No.
Use keypad to input digit, the coaster pager number has to be
preprogrammed in the paging transmitter, press ENT, the message
will be saved in the transmitter. The serial number will automatically
come to 01. If to delete the previous data, press upper/lower key to
move the cursor to the serial number, press* to delete the bill No.
information. If the next input coaster number is already existed in
the transmitter, it will replace the previous one and its
corresponding bill No.
2.5 User Setup
User setup list as table 2.1.
Table 2.1 User Setup List
Interface Function
1.DataTime Setup time
2.Duty Alert Staff Duty Alert
3.Out of Range Out of Range Alert
4.PassWord Modify password
5.Receive set Setup coaster
6.After call Repage
8-------------------------
®
!¼l!¼l©@OO
Standard Guest Paging System User Manual
2.5.1 Setup Time
Setup time interface as picture 2.7
Use the key pad to input the time, use the left/right key
to move the cursor and modify the data.
Picture 2.7 Setup Time Interface
2.5.2 Duty Alert
Setup duty alert interface as picture 2.8, 1. is the duty
alert serial number, maximum three duty alert messages
can be edited, 010 is the staff pager number, 001min is the
interval for circularly page, the unit is minute. '#' is to
switch ON/OFF interface. ON is to turn on this function, OFF
is to turn it off. Press ENT to enter the interface as picture
2.9.
Picture2.8 Setup Duty Alert
-------------------------9