®
��©@00
Standard Guest Paging System User Manual
Picture 2.9 is to input the duty alert message, use the
keypad to input the data and use the left/right key to move
the cursor and modify the data.
Picture 2.9 Duty Alert Input Message Interface
Duty alert is for staff use. The ID address has to be the
staff' s pager ID, the alert message will be sent as the
preprogrammed time interval. If ON, then this duty alert will
be constantly sent until it switches to OFF.
2.5.3 Out of Range
Out of range alert as picture 2.10, 1 Os is the heartbeat
time between paging transmitter and coaster, the time unit
is second. '#' is to switch on/off this function. For this
function, the second coaster ID should be used, after this
function is on, the transmitter will send the heartbeat data
as the preprogrammed time interval, when the coaster does
not receive the heartbeat data within 2 times as the
preprogrammed time( here it' s 20S), the coaster will give
an out of range alert.
Picture 2.10 Setup Out of Range Alert
10-------------------------
®
��©@00
Standard Guest Paging System User Manual
Notes: For this function, the second ID address has to be
used, and it has to be matched with the guest group paging
ID.
2.5.4 Modify Password
Pre: Input current password, e.g. 1234
Now: New modified password, e.g.: 2345
Press ENT, there will be a success prompt, otherwise
failed, as picture2.11
Picture 2.11 Modify Password Interface
2.5.5 Coaster Setup
It is to setup the coaster pager parameter, the interface as
picture 2.12.
Picture 2.12 Coaster Setup Interface
1. Setup Ring Times
N:_is ring times of coaster, maximum 9 times, if 0, it will ring
all the time until the coaster is put back to the charger, this can
be modified through the keypad 0-9.
------------------------- 11
