MKS Stabil-Ion 370 Series, Инструкция по эксплуатации, Страница: 61 / 122

4 Preparing the Stabil-Ion System for Operation
4-3
Series 370 Stabil-Ion Instruction Manual - 370119
then, with a subsequent Cancel keystroke, transfer back to the IG Status for the tube that is
turned ON. Also, when in a submenu with a flashing value, the Cancel key will return the
display to the previously stored value.
The menus break into submenus to allow fast access to any one function. Table 4-1 gives a
summary of the menu functions.
See Figure 4-3a and Figure 4-3b for a quick reference flow diagram.
NOTE: * The Pressure Units and the Line Frequency may be different than
those shown in Table 4-1, depending on the configuration you purchased.
Table 4-1 Electrometer Module Display Menu Summary
IG1 STATUS No submenus; displays summary of IG1 status
IG2 STATUS No submenus; displays summary of IG2 status
CONTROL
1. Pressure Range
2. Filament Selection
3. Scale Factor
4. Gas Type, IG
5. Gas Type, CG
Default Value
H
Fil 1
1.000
a N2
a N2
SETUP
1. Pressure Units
2. Degas Time
3. Overpressure Threshold
4. Line Frequency
5. Display Update
Default Value
Torr *
10
100%
60 Hz *
FAST
INFO 1. IG Calibration Memory Serial Nos.
2. CG Calibration Memory Serial Nos.
3. Turn-OFF History
4. Code Version No.