MKS Spectra 138A, Инструкция по эксплуатации

Страница: 14 / 48

PAS Trolley Manual
LP101017 Rev 1.02
Page 6
Upon loss of the protective-ground connection, all accessible
conductive parts (including knobs and controls that may appear to be
insulating) can render an electrical shock.
GROUND AND USE PROPER ELECTRICAL FITTINGS
Dangerous voltages are contained within this instrument. All
electrical fittings and cables must be of the type specified, and in
good condition. All electrical fittings must be properly connected
and grounded.
USE THE PROPER POWER CORD
Use only a power cord that is in good condition and which meets the
input power requirements specified in the manual.
Use only a detachable cord set with conductors that have a cross-
sectional area equal to or greater than 1.5 mm
2
. The power cable
should be approved by a qualified agency such as VDE, Semko, or
SEV.
USE THE PROPER POWER SOURCE
This product is intended to operate from a power source that does not
apply more voltage between the supply conductors, or between either
of the supply conductors and ground, than that specified in the
manual.
USE THE PROPER FUSE
Use only a fuse of the correct type, voltage rating, and current rating,
as specified for your product.
KEEP AWAY FROM LIVE CIRCUITS
Do not replace components with power cable connected. Under
certain conditions, dangerous voltages may exist even with the power
cable removed. To avoid injuries, always disconnect power and
discharge circuits before touching them.
USE CAUTION WHEN OPERATING WITH HAZARDOUS MATERIALS
If hazardous materials are used, observe the proper safety
precautions, completely purge the instrument when necessary, and
ensure that the material used is compatible with the materials in this
product, including any sealing materials.