MKS PR 4000 F, Инструкция по эксплуатации

Страница: 29 / 69

PR4000F Chapter 4: Operation
21
4.3 Setup
It is recommended to check all parameters for correct settings before starting operation. Detailed
information for operation of the different kind of transducers, controllers etc. are given later in this
chapter. For understanding these instructions it is necessary to have studied the setup informations
before.
After switching on the power or pressing the escape key (ESC) you will see the first display
configured for operation (typically display #1). By consecutively pressing the down arrow key you
will come to the operation / setup level junction.
Entering Setup
Enter the setup submenu by pressing the right arrow key. A cursor appears under the word
SETUP. Confirm by pressing the enter key (ENTER). Or simply press two times the enter key!
For deactivating the setup level refer to Exit Setup later in this chapter.
If you mark the word RESET with the cursor and confirm with RESET then all parameters are set
to their default values.
Remember that you leave with they ESC key without changing anything in the particular window.
Note
By using the default settings you can ease the setup procedure. Refer to
Exit Setup (last window of the setup level) of how select either pressure
or flow setup.
Once entered the setup submenu use the down/up arrow keys to step successively to the different
windows.
SETUP RESET
V 01.29 19991011