MKS HPQ3, Руководство по оборудованию

Страница: 25 / 64

MKS Instruments UK Ltd
HPQ3 Hardware Manual – SP101019.101 October 2012
25
3. Analyser Installation
This section deals with getting the equipment out of its box and installing it on your system. If you
have any questions or experience any difficulties, contact your local MKS Instruments
representative who will be able to advise you.
3.1 Unpacking
When you receive the HPQ3 carefully check each item before removing the foam packaging and
plastic wrapping, to ensure that no physical damage has occurred during shipment. Also, make
sure all items have been received correctly by checking each item against the enclosed packing
slip.
If there has been obvious damage during shipment, or if there are items listed on the packing slip
as shipped which are not in the box, immediately contact your local MKS sales/service
representative.
3.2 Inspecting the analyser
The analyser is both fragile and very easily contaminated by the slightest touch from your fingers
or undesirable surfaces.
Handle the analyser ONLY at the vacuum flange.
Once you have inspected the analyser, return it to the protective envelope until you are ready for
installation.
The analyser is supplied vacuum sealed inside a vac-formed plastic envelope for protection.
Carefully unfold the envelope to allow access to the analyser. Do not discard this packaging.
Hold the analyser at the flange, with the quadrupole and ioniser structure vertically up. Carefully
inspect all the observable insulators for damage.