MKS 275420-1-GQ-T-00011, Инструкция по эксплуатации

Страница: 22 / 52

4
Operation
22 Series 275 Convectron Module with DeviceNet
Instruction Manual - 275502
4.2 Front Panel Indicators and Adjustments
The two LEDs on the front panel indicate the current status of the Mini-Convectron Module and the
DeviceNet network. Four potentiometers provide adjustments for setpoints, baud rate, and MAC ID
settings. The two LED status indicators are explained in Table 4-1 and Table 4-2; the four
potentiometers are explained in Section 4.2.3, 4.1.4, and 4.1.5.
Figure 4-2 Series 275 DeviceNet Mini-Convectron Front Panel
4.2.1 Module (MOD) LED Status
Table 4-1 Series 275 DeviceNet Mini-Convectron Module LED Status
LED Status
Off No Power to the module.
Green Operating normally.
Orange The module has an unrecoverable fault, and may need to be replaced.
Flashing Orange-Green The module is in self-test. Refer to the Identity Object in Volume II of the DeviceNet
specification.
Using the module to measure the pressure of flammable or explosive gases can
cause a fire or explosion resulting in severe property damage or personal injury.
Do not use the module to measure the pressure of flammable or explosive gases.