BEAM SPOT WASH (3IN1) 350W
BEAM SPOT WASH (3IN1) 350W
.Lamp work will reach a very high temperature, Vapor discharge lamp can not
continue to supply this physical characteristics, therefore, the power completely cool
for 10 minutes before on the operation. Failure to do so will lead to a high-pressure
discharge and short circuit burned out the computer's control panel components.
Notes:
Unplug the light from power before lamp installation or replacement
and wait for it to cool.
Power Code Connection:
Connect the power cord as follows:
L (live) =brown
E (earth) =yellow/green
N (neutral) =blue
Use the plug provided to connect the mains power to the projector paying attention to
the voltage and frequency marked on the panel of the projector. It is recommended
that each projector be supplied separately so that they may be individually switched
on and off.
★
It is essential that each projector is correctly earthed and the
electrical installation conforms to all relevant standards.
DMX Connection:
Connection between the controller and a projector and between one projector and
another must be made with a 2 core-screened cable, with each core having at least a
0.5mm diameter. Connection to and from the projector is via cannon 3 pin (which are
included with the projector) XLR plugs and sockets. The XLR's are connected as
shown in the figure above.
3
CH5
158-161
162-166
162-166
167-171
172-176
177-180
181-185
186-189
221-225
226-255
Red
Orange
Orange
Deep Blue
Deep Green
CTB
CTO
Fluorescence
Rotating Color-Wheel backwards Fast-Slow
Rotating Color-Wheel forwards Slow-Fast
CH6
0-255
Gobo speed
Speed from slow to fast
CH7
000-005
006-011
012-017
018-023
024-029
030-035
036-041
042-047
048-053
054-059
060-065
066-071
072-077
078-083
084-089
090-095
096-101
102-108
109-113
114-119
120-125
126-131
Static gobo wheel
NO
Gobo1
Gobo2
Gobo3
Gobo4
Gobo5
Gobo6
Gobo7
Gobo8
Gobo9
Gobo10
Gobo11
Gobo12
Gobo13
Gobo14
Gobo15
Gobo16
Gobo17
Gobo of shake
Gobo1
Gobo2
Gobo3
Gobo4
16
Содержание MJ-1350
Страница 2: ......
