MJ LED LIGHTNING MJ-1350, Руководство пользователя

Страница: 7 / 12

BEAM SPOT WASH (3IN1) 350W BEAM SPOT WASH (3IN1) 350W
Note: Care should be taken to ensure that none of the pins touch the metallic body of
the plug or each other. The body of the plug is not connected in any way. The XLED
590 accepts digital control signals in protocol DMX512 (1990).
Connect the controller’s output to the first fixture’s input, and connect the first fixture’s
output to the second fixture’s input and connect the rest fixtures in the same way.
Eventually connect the last fixture’s output to a DMX terminator as shown in the figure
below.
DMX Terminator:
In the Controller mode, at the last fixture in the chain, the DMX output has to be
connected with a DMX terminator. This prevents electrical noise from disturbing and
corrupting the DMX control signals.
The DMX terminator is simply an XLR connector with a 120Ω (ohm) resistor
connected across pins 2 and 3, which is then plugged into the output socket on the
last projector in the chain. The connections are illustrated below.
4
CH4
000-019
020-024
025-129
130-139
140-149
150-159
160-169
170-199
200-209
230-239
240-255
Marco
No Function
Energy Saving Mode(280W)
No Function
Lamp On
Pan/Tilt Reset
No Function
Effect Reset
No Function
Fixture Reset
Lamp Off
No Function
CH5
0
001-009
010-018
019-027
028-036
037-045
046-054
055-063
064-072
073-081
082-090
091-099
100-108
109-117
129-129
130-134
135-138
139-143
144-147
148-152
153-157
Color wheel
White
Light Red arbitrarily
Deep yellow arbitrarily
Blue arbitrarily
Green arbitrarily
yellow arbitrarily
Fuchsine arbitrarily
Red arbitrarily
Orange arbitrarily
Deep Blue arbitrarily
Deep Green arbitrarily
CTB arbitrarily
CTO arbitrarily
Fluorescence arbitrarily
White
Light Red
Deep yellow
Blue
Green
yellow
Fuchsine
15