MJ LED LIGHTNING MJ-1350, Руководство пользователя

Страница: 12 / 12

BEAM SPOT WASH (3IN1) 350W BEAM SPOT WASH (3IN1) 350W
Trouble Shooting:
Problem Answer
The moving head light doesn’t
switch on.
Check the fuse the power socket
Replace the lamp
Although shines, but the moving
head lamp doesn’t accept the
instruction of the controller.
Check the digital start address and also check
the connection situation of the communication
control line
The moving head lamp only can
work intermittently.
Inspect the power supply and voltage is whether
normal.
Make sure the fan is working well or fans and
their filters not blocked
Defective projection Make sure the lamp is within its life limit
Remove dust or grease from the lenses.
The beam appears dim heck the optics is clean or the lens in good
condition(not cracked)
Replace with a new lamp of the specified type
and rating.
☆
Other maintain work should by the specialist which has the experience
to carry on.
Equipment and Appendix:
☆
Beam 350W Moving Head Light 1pcs
☆
Power Cable 1pcs
☆
XLR connector 1unit
☆
Light Hook 2pcs
☆
The Product of Instruction 1pcs
9
Channel List:
24CH model
Channel Value Function
CH1
0-255
Pan Movement: 8bit
Pan
CH2
0-255
Pan Fine: 16bit
Pan fine
CH3
0-255
Tilt Movement: 8bit
Tilt
CH4
0-255
Tilt Fine: 16bit
Tilt fine
CH5
0-255
Speed of Pan/tilt
Speed, Max to min
CH6
000-019
020-024
025-129
130-139
140-149
150-159
160-169
170-199
200-209
230-239
240-255
Marco
No Function
Energy Saving Mode(280W)
No Function
Lamp On
Pan/Tilt Reset
No Function
Effect Reset
No Function
Fixture Reset
Lamp Off
No Function
CH7
0
001-009
010-018
019-027
028-036
037-045
046-054
055-063
Color wheel
White
Light Red arbitrarily
Deep yellow arbitrarily
Blue arbitrarily
Green arbitrarily
yellow arbitrarily
Fuchsine arbitrarily
Red arbitrarily
10