MITSUBISHI ELECTRONICS AMERICA, INC.
ST200 Series Technical Support Manual
60
January 2000
♦
Ensure that the MT has been correctly configured (i.e., proper setup as detailed in
operating instructions manual).
♦
Ensure that a suitable power source is properly connected to the MT.
After successful commissioning:
♦
Perform tests to confirm proper operation of the MT
--Outbound and Inbound Telephone Call
--Outbound and Inbound Data call (if service subscription applies)
--Net Radio (Dispatch) transmit and receive (if applicable)
♦
Ensure proper information provided to the MT end-user (if applicable)
--Phone numbers (Telephone and Data number as applicable)
--4-Digit Security Code
♦
Ensure user has owners manual and understands operation of equipment
7.3 Number Assignment Module (NAM) Programming
NAM (number assignment module) is a general name for the data storage area within the MT
where information required for system operation is stored. Detailed NAM Programming
procedures follow.
If the NAM of your MT has not previously been programmed, or a NAM check error is detected
during the self test when turning the MT on, the following display indicates that NAM
programming must be completed.
1.
Press the | PWR | key on the Handset for at least ½ second. The display will briefly
check all fields in the display which will be followed by an audible tone.
2.
Press and hold the CLR key after the initial power on and within 3 seconds.
Program
SAT NAM
