MITSUBISHI ELECTRONICS AMERICA, INC.
ST200 Series Technical Support Manual
40
January 2000
6.1.9 Handsets and Accessories
The following four steps and subsequent figure are for
handset cradle
installation:
1.
Select the mounting position for the Handset cradle so that it will be within easy reach of
the user and does not disturb day-to-day operations.
2.
Install the Handset cradle with the attachment screws by using a mounting stand (a
mounting stand is not included in the kit). This is the same type mounting stand which is
commonly used for cellular phone installations.
3.
Route the remote cable and secure occasionally with tie straps to prevent movement of
the cable. The cable should be routed in areas where regular usage/operation will not
damage the cable. Once the cable is routed, connect the other end of the remote cable to
the CTU or other mounting location.
Note:
The handset cradle type SZ130A includes a junction box for hands free and dispatch
operation using the PTT Microphone (SZ300A).
