MITSUBISHI ELECTRONICS AMERICA, INC.
ST200 Series Technical Support Manual
110
January 2000
pcANYWHERE (version 2.0)
1. Connect computer to the CTU
Connect your computer to the CTU and configure the CTU as described in this appendix.
2. Configure pcANYWHERE to call a Host PC
2.1 At
the
pcAnywhere window choose “Call a Host PC”
2.2
In the window “Host PC Directory” highlight selection “pcANYWHERE Host via
modem”
2.3
Click on: “Edit...” to enter “Edit Host PC Entry” window
2.3.1
Enter information into “Host PC Information”
2.3.2
Enter phone number into “Phone Number”, click “OK”
2.3.3
“Hardware Selection” window
“Your Hardware Configuration Name” select
Modem
Choose: “Edit...”to “Edit Hardware Configuration”
In “Hardware Information” in the window “Description of Hardware Entry”
choose
Modem;
in “Modem”:
Check
ON
-- Use Modem.
Pull Down --
Hayes Compatible
Data Rate:
4800
Flow Control:
NONE
Parity:
None
Click on “Advanced...”
In the “Advanced Hardware Options” turn
ON
– “Adjust Port Speed to Modem”
Click “OK”
2.3.4
Click “OK”
3. Configure pcANYWHERE to be a Host PC
3.1
In the pcANYWHERE window choose “Be A Host PC”
3.2
In the “Allow Control Options” window enter your “Caller Information” options, than
click “OK”
3.3
“Your Hardware Configuration Name” select
Modem
and click “Edit” to “Edit Hardware
Configuration”
3.4
In the “Hardware Information” in the window “Description of Hardware Entry” choose
Modem
3.5
In the window ”Device” select port COMx (Ref. 1.2 on the page D6). In the “Modem”
window:
Check
ON
-- Use Modem.
Pull Down --
Hayes Compatible
Data Rate:
4800
Flow Control:
NONE
Parity:
None
Click on “Advanced...”
In the “Advanced Hardware Options” window check box to Turn
ON
– “Adjust Port
Speed to Modem”, Click “OK”
3.6
Click “OK”
3.7
Click on: “Wait for Call”
