Mitsubishi Mirage 2017, Руководство пользователя, Страница: 218 / 305

To play tracks from USB device (if so equipped)
Comfort controls 7-31
7
“Genre” (vehicles with Bluetooth
®
2.0 inter-
face) menus on your iPod.
Operate the SEL switch to select desired
tracks.
The selected menu or category or track is
shown in the display.
When this mode is activated by pressing the
SEL switch, the SEL indicator will be appear
on the display.
N00762800023
Press the RPT button during playback to
show “RPT” in the display.
To exit this mode, press the button again.
N00762900024
Press the RDM button to show “RDM” in the
display.
The iPod randomly selects tracks from the
current category and plays the selected tracks.
To exit this mode, press the button again.
N00763000035
Press and hold the RDM button until you hear
a beep to show “F-RDM” in the display.
The iPod randomly selects tracks in the
album from the current category and play the
selected tracks.
To exit this mode, press the button again.
N00763101059
You can display the track titles, artist names,
genre and album titles recorded in the iPod.
The display changes as follows every time
the INFO button is pressed during playback:
Album title

Track name

Artist name

Genre (vehicles with Bluetooth
®
2.0 inter-
face)

Normal display.
N00763200040
Desired tracks can be selected and played
from your iPod by “Artist”, “Album”, “Playl-
ist” and “Genre” using voice commands.
For information concerning the voice recog-
nition function or speaker registration func-
tion, refer to “Bluetooth
®
2.0 interface” on
page 5-81.
The following explains how to prepare for
voice operation and play the tracks.
Press the SEL switch :To start this mode or
to select the menu or
category or track.
Turn the SEL switch :To show the menu or
category or track.
NOTE
 To cancel the selection, press the button
to return to the previous step.
 If no operation is performed for 10 seconds
or more or other button is operated after the
SEL switch has been pressed, searching of
the desired tracks is canceled.
 If no operation is performed for 5 seconds or
more after the track is displayed, playback
starts.
 When the SEL indicator is not appear on the
display and the SEL switch is operated, the
volume adjustment is activated.
To play the same track repeatedly
To play tracks in random order
To play tracks in each album in
random order
To switch the display
NOTE
 Up to 11 characters are shown in the display
at once. If the title is cut off in the middle,
press the PAGE button. The next characters
are displayed every time this button is
pressed.
 If no title is stored, “NO TITLE” is shown in
the display.
 Characters that cannot be displayed are sub-
stituted by
“•”.
To play iPod tracks via voice
operation (vehicles with Blue-
tooth
®
2.0 interface)
BK0235100US.book 31 ページ ２０１５年１１月２０日 金曜日 午後３時１２分