Mitsubishi Mirage 2017, Руководство пользователя, Страница: 152 / 305

Bluetooth® 2.0 interface (if so equipped)
Features and controls 5-89
5
1. Stop your vehicle in a safe area, put the
gearshift lever in the “N” (Neutral) posi-
tion (manual transaxle), or the selector
lever in the “P” (PARK) position (contin-
uously variable transmission (CVT)), and
pull the parking brake lever.
2. Press the SPEECH button.
3. Say “Pair Device.”
4. The voice guide will say “Start pairing
procedure on the device. See the device
manual for instructions.” and then will
say “The pairing code is <pairing code>.”
5. Enter in the Bluetooth
®
device the 4-digit
number that has been read out in Step 4.
 Pairing procedure - Type 2
(if so
equipped)
NOTE

You cannot pair any Bluetooth
®
device with
the Bluetooth
®
2.0 interface unless the vehi-
cle is parked. Before pairing a Bluetooth
®
device with the Bluetooth
®
2.0 interface,
confirm that the vehicle is parked in a safe
location.
NOTE
 The following procedure ( to ) can also
be used instead of saying “Pair Device.”
Replace this step 3 with the following proce-
dure if you prefer.
Say “Setup.”
Say “Pairing Options.”
The voice guide will say “Select one of
the following: pair, edit, delete, list or set
code.”
Say “Pair.”
 If 7 devices have already been paired, the
voice guide will say “Maximum devices
paired” and then the system will end the
pairing process. To register a new device,
delete one device and then repeat the pairing
process.
(Refer to “Selecting a device: Deleting a
device” on page 5-90.)
NOTE
 Some Bluetooth
®
devices require a specific
pairing code. Please refer to the device man-
ual for pairing code requirements and read
the next section “If your device requires a
specific pairing code” on page 5-90 to set the
pairing code.
 The pairing code entered here is only used
for the Bluetooth
®
connection certification.
Depending on the connection settings of the
Bluetooth
®
device, this code may have to be
entered each time you connect the Blue-
tooth
®
device to the Bluetooth
®
2.0 inter-
face. For the default connection settings,
refer to the instructions for the device.
NOTE
 Depending on the Bluetooth
®
device, it may
take a few minutes to pair it with the Blue-
tooth
®
2.0 interface.

If the Bluetooth
®
2.0 interface cannot recog-
nize the Bluetooth
®
device, the voice guide
will say “Pairing has timed out” and the pair-
ing process will be cancelled.
Confirm that the device you are pairing sup-
ports Bluetooth
®
, and try pairing it again.
NOTE
BK0235100US.book 89 ページ ２０１５年１１月２０日 金曜日 午後３時１２分