Mitsubishi Mirage 2017, Руководство пользователя, Страница: 131 / 305

Multi-information display
5-68 Features and controls
5
[Except for vehicles equipped with the
F.A.S.T.-key]
Turn the ignition switch to the “ON” posi-
tion from the “ACC” or “OFF” position.
[For vehicles equipped with the F.A.S.T.-
key]
Change the operation mode to ON from
ACC or OFF.
 When the average fuel consumption is
being displayed, if you hold down the
multi-information display switch, these
calculations will be reset to zero.
 When the engine switch or the operation
mode is in the following conditions, the
average fuel consumption display will
automatically reset.
[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch has been set to the
“ACC” or “OFF” position for about 4
hours or more.
[For vehicles equipped with the F.A.S.T.-
key]
The operation mode has been set to ACC
or OFF for about 4 hours or more.
N00557100156
The fuel consumption display unit can be
changed. The distance and amount units are
also switched to match the selected fuel con-
sumption unit.
1. When you lightly press the multi-informa-
tion display switch a few times, the infor-
mation display switches to the average
fuel consumption display.
Refer to “Information display” on page
5-62.
2. Press and hold the multi-information dis-
play switch for about 5 seconds or more
until buzzer sound is heard twice.
3. Press and hold the multi-information dis-
play switch to switch in sequence from
“km/L”

“L/100 km”

“mpg”

“km/L”.
The distance units is also changed in the fol-
lowing combinations to match the selected
fuel consumption unit.
Auto reset mode
NOTE
 The average fuel consumption display can be
reset separately for the auto reset mode and
for the manual reset mode.
 Disconnecting the battery cable will erase
from memory the manual reset mode or auto
reset mode setting for the average fuel con-
sumption display.
 The initial (default) setting is “Auto reset
mode”.
Changing the fuel consumption
display unit
NOTE
 The display units for the driving range, the
average fuel consumption are changed, but
the units for the indicating needle (speedom-
eter), the odometer, the trip odometer and the
service reminder will remain unchanged.
 If the battery is disconnected, the memory of
the unit setting is erased and it returns auto-
matically to factory setting.
BK0235100US.book 68 ページ ２０１５年１１月２０日 金曜日 午後３時１２分