Mitsubishi Mirage 2017, Руководство пользователя, Страница: 121 / 305

Tire pressure monitoring system (if so equipped)
5-58 Features and controls
5
Each tire, including the spare, should be
checked monthly when cold and inflated to
the inflation pressure recommended by the
vehicle manufacturer on the vehicle placard
or tire inflation pressure label. (If your vehi-
cle has tires of a different size than the size
indicated on the vehicle placard or tire infla-
tion pressure label, you should determine the
proper tire inflation pressure for those tires.)
As an added safety feature, your vehicle has
been equipped with a tire pressure monitoring
system (TPMS) that illuminates a low tire
pressure telltale when one or more of your
tires is significantly under-inflated.
Accordingly, when the low tire pressure tell-
tale illuminates, you should stop and check
your tires as soon as possible, and inflate
them to the proper pressure. Driving on a sig-
nificantly under-inflated tire causes the tire to
overheat and can lead to tire failure.
Under-inflation also reduces fuel efficiency
and tire tread life, and may affect the vehi-
cle’s handling and stopping ability. Please
note that the TPMS is not a substitute for
proper tire maintenance, and it is the driver’s
responsibility to maintain correct tire pres-
sure, even if under-inflation has not reached
the level to trigger illumination of the TPMS
low tire pressure telltale.
Your vehicle has also been equipped with a
TPMS malfunction indicator to indicate when
the system is not operating properly. The
TPMS malfunction indicator is combined
with the low tire pressure telltale.
When the system detects a malfunction, the
telltale will flash for approximately one min-
ute and then remain continuously illuminated.
This sequence will continue upon subsequent
vehicle start-ups as long as the malfunction
exists.
When the malfunction indicator is illumi-
nated, the system may not be able to detect or
signal low tire pressure as intended.
TPMS malfunctions may occur for a variety
of reasons, including the installation of
replacement or alternate tires or wheels on the
vehicle that prevent the TPMS from function-
ing properly. Always check the TPMS mal-
function telltale after replacing one or more
tires or wheels on your vehicle to ensure that
the replacement or alternate tires and wheels
allow the TPMS to continue to function prop-
erly.
N00532801540
1. If the tire pressure monitoring system
warning light illuminates, avoid hard
braking, sharp steering maneuvers and
high speeds. You should stop and adjust
the tires to the proper inflation pressure as
soon as possible. Adjust the spare tire at
the same time. Refer to “Tires” on page
9-12.
If the warning light illuminates
while driving
NOTE
 When inspecting or adjusting the tire pres-
sure, do not apply excessive force to the
valve stem to avoid breakage.
 After inspecting or adjusting the tire pres-
sure, always reinstall the valve cap on the
valve stem.
Without the valve cap, dirt or moisture could
get into the valve, resulting in damage to the
tire inflation pressure sensor.
 Do not use metal valve caps, which may
cause a metal reaction, resulting in corrosion
and damage of the tire inflation pressure sen-
sors.
 Once adjustments have been made, the warn-
ing light will go off after a few minutes of
driving.
BK0235100US.book 58 ページ ２０１５年１１月２０日 金曜日 午後３時１２分