Mitsubishi MELSEC-F FX2N-1RM-E-SET, Руководство пользователя

Страница: 31 / 140

Installation 2
2-1
FX
2N
-1RM-E-SET Programmable Cam Switch
2. Installation
This section describes how to install the FX
2N
-1RM and the resolver.
2.1 Installation method
The FX
2N
-1RM can be mounted via a DIN rail or directly mounted with M4 screws.
< When mounted via a DIN rail >
The FX
2N
-1RM can be mounted to a DIN rail DIN 46277 (Width: 35 mm (1.38 inch)) without any
modification.
When removing the FX
2N
-1RM, pull the DIN rail mounting hook downward.
< When directly mounted >
Mount the FX
2N
-1RM with M4 screws while referring to section 1.4 Outside dimensions and
name of each part.
Assure clearance of 1 to 2 mm (0.04 to 0.08 inch) between units.
2.2 Wiring
When arranged in 2 rows
Use M3
6.2mm
(0.24inch)
or less
6.2mm
(0.24inch)
or less
• Use crimp-style terminals of the size shown on the left.
• The terminal tightening torque should be 0.5 to 0.8 N
⋅
m. Tighten
terminals securely so that malfunction cannot occur.
50 mm (1.97 inch) or more
Extension cable
Main unit
FX
2N
-1RM
• An extension cable of 55 mm (2.17 inch) is offered as
an accessory of the FX
2N
-1RM.
An extension cable of FX
0N
-30EC(300mm,11.81
inch) and FX
0N
-65EC(650mm,25.59 inch) are offered
as options.
For 1-row arrangement: Cable of 55 mm(2.17 inch)
For
2-row arrangement: Cable of 300mm(11.81
inch), 650 mm(25.59 inch)
(option)
(When FX
2N
-1RM is connected with an FX
2N
C
series
PLC, these extension cables cannot be used.)
• A cable is built in an extension block.
• When connecting an
extension cable, fold it and
accommodate it in the
connector cover of the
counterpart equipment as
shown in the figure on the
right.