Mitsubishi MELSEC-F FX2N-1RM-E-SET, Руководство пользователя

Страница: 118 / 140

Test 10
10-2
FX
2N
-1RM-E-SET Programmable Cam Switch
< Key operation >
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
< Display >
A value flashes on the DEG, and the value is
changed.
Modifying either the ON angle or the OFF angle
+
ON
OFF
While the ON LED is lit: The ON angle is modified.
While the OFF LED is lit: The OFF angle is modified.
-
The angle is increased by 0.5 degree
every time the [+] key is pressed.
The angle is decreased by 0.5 degree
every time the [-] key is pressed.
GO
Determine the modified angle.
The set value is written to the EEPROM,
and the output is changed. A new value is displayed on the DEG.
When modification of the ON angle is finished,
the OFF angle of the same step is displayed.
When modification of the OFF angle is finished,
the ON angle of the next step is displayed.
< Key operation >
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
< Display >
A value flashes on the DEG, and the value is
changed.
Modifying the ON angle and the OFF angle consecutively
+
ON
OFF
While the ON LED is lit: The ON angle is modified.
-
The angle is increased by 0.5 degree
every time the [+] key is pressed.
The angle is decreased by 0.5 degree
every time the [-] key is pressed.
GO
Determine the modified angle.
The set value is written to the
EEPROM, and the output is changed. A new value is displayed on the DEG.
When modification is finished, the ON angle of the next
step is displayed.
+
ON
OFF
-
The angle is increased by 0.5 degree
every time the [+] key is pressed.
The angle is decreased by 0.5 degree
every time the [-] key is pressed.
While the OFF LED is lit: The OFF angle is modified.
A value flashes on the DEG, and the value is
changed.
• The angle can be modified by up to +10 degrees at a time.
If the angle entered is to become consecutive to a set angle in another program, the
[+] or [-] key is not accepted just before the angle entered becomes consecutive.
Cautions on modification of the ON/OFF angle