Mitsubishi MELSEC-F FX-TRN-BEG-E, Руководство пользователя

Страница: 154 / 164

FX-TRN-BEG-E
D-24
C-5-7: Stage Settings
The curtains are opened and closed horizontally, and the stage is moved up and down.
Stage moving up/down
- The stage carries up and down the person.
An output (Y) is assigned to each of the stage moving up and the stage moving down respectively.
While either output is ON, the stage is moved up or down. If the both outputs are set ON at the
same time, the stage is stopped. The motors are not displayed on the screen.
Stage upper limit/lower limit sensor
- Sensors are provided in the upper limit and the lower limit of the stage.
Use these sensors to stop (set OFF) the stage moving up and moving down motors.
* The sensors are not displayed on the screen.
- Control of the person located on the stage is not required. (The person remains on the stage and
does not move.)
Buzzer
- An output (Y) is assigned to the buzzer. When the output is set ON, the buzzer flickers in yellow
and continuous "bing-bong" sound is issued intermittently.
• Appearance (side view) • Operation
Curtain opening/closing
- An individual output (Y) is assigned to
each of the curtain opening and the curtain
closing.
The opening output or the closing output is
held while it is set ON.
* The curtain opening and closing motors
are not displayed on the screen.
Curtain position sensor
- In the upper portion of the curtains, the
inside, middle and outside sensors are
provided (six sensors in all).
These sensors are used to detect the
curtain opening/closing position.
* The ON/OF status of the sensors not
displayed graphically can be monitored
by the red indicator at the left part of the
device numbers on the simulation or
indicators on the I/O image table in the
virtual PLC.
Details of stage
(front view)
Stage
Buzzer
Sensor
Curtain
opening/
closing
motors
Curtain
Person
(not controlled)
Stage moving up/
down motors
In the front view and
the plan view, you can
see in detail how the
trapdoor is moving.