Mitsubishi MELSEC-F FX-TRN-BEG-E, Руководство пользователя

Страница: 161 / 164

FX-TRN-BEG-E
D-31
D-2: What to do if...
It indicates that you completed the
exercise. (It is not displayed if you are
not registered as a user when starting
the software.)
Print out the program you have written, and check the
contents.
Refer to model answers if needed.
The machine in the simulation does
not operate.
Check whether the device assignments in the program are
equivalent to those shown in the guidance.
A conveyor does not move if the forward and reverse motors
are ON at the same time.
I would like to speed up the operations
in the virtual manufacturing cell.
When the performance of the computer is improved, the
operation speed of the machines is improved accordingly.
If you have an error situation such as 'the input data from a
sensor is not received properly', speed adjustment is required.
The program cannot receive the input
data from the sensor.
Select "Tools"
→
"Options" and reduce the simulation speed.
A part does not stop where it should
Something is wrong with the 3-D
screen. (The display is disturbed, etc.)
• Check whether the video card of your computer supports
the direct 3-D.
• Select “My computer”
→
“Control panel”
→
“Screen”
→
“Settings” tab
→
“Details” button
→
[Performance or
troubleshooting] tab, then decrease the set value of
“Hardware accelerator” to “zero”. If the problem is solved,
increase the set value one by one up to a highest allowable
value.
• Select “My computer”
→
“Control panel”
→
“Screen”
→
“Settings” tab, then increase [Screen color] to "24 bits" or
decrease it to "16 bits".
Or the problem may be solved if you update the video driver to
the latest version provided by the computer manufacturer. (For
details, consult with the computer administrator.)