Mitsubishi MELSEC-F FX-TRN-BEG-E, Руководство пользователя

Страница: 19 / 164

FX-TRN-BEG-E Outline of the Lesson Plan 2
A-13
2.5.3 Remote Control
Switches the mode in the virtual PLC from RUN to STOP.
• The remote control can be displayed or hidden selecting “Tools”
→
“Remote Control“.
2.5.4 Ladder Program Area
Use this area to edit, create, monitor, save and print programs.
The details are explained in the ’LADDER PROGRAMS’ Section in this manual.
Tutor box
Displays or hide the guidance window.
Remote control
[Edit Ladder]
Allows to create and modify programs in the ladder program
area.
Switches the mode in the virtual PLC from RUN to STOP.
[Write to PLC]
Transfers the program you create in the ladder program area to
the virtual PLC.
[Reset]
Returns the simulated machine to the initial condition.
- Resets the simulation in case of unwanted occurrence (such
as parts are stuck) takes place.
- Initializes the virtual PLC.
Initializes outputs or devices.
(The same operation as an actual PLC is switched from STOP
to RUN mode.)
Learning status display
Indicates the status such as “LEARN”, “PROGRAM” and “RUN”.
[Main]
Displays the main menu, or saves the program being edited and
then displays the main menu.
Jump buttons
Clicked to go to the next/previous page in the guidance.
(Use these buttons when indicated on the page.)
Title bar
Click the tutor on the remote control to alternately hide and
display the guidance window.
Or select “Tool”
→
“Fix remote control bar” and delete the check
mark to display the title bar at the top of the remote control. By
dragging the title bar using the mouse, you can move the
guidance window to an arbitrary position.
[F] / [T] / [S]
Changes over the view point of the 3D screen.