4 - 1 4 - 1
MELSEC-A
4 SETUP AND PREPARATION BEFORE OPERATION
4 SETUP AND PREPARATION BEFORE OPERATION
4.1 Pre-Operation Procedure
This section explains the preparatory procedure for operating the AJ65VBTCU-
68DAVN.
Start data link.
Make offset/gain setting?
Offset/gain setting (Refer to Section 4.5.)
END
No
Yes
Create a program.
Create a program. (Refer to Chapter 5.)
START
Create a program.
Mode select switch setting
(refer to Section 4.3, Section 4.4)
4.2 Precautions When Handling
The precautions when handling the AJ65VBTCU-68DAVN are described below:
CAUTION
Do not touch the pins while power is on. Doing so can cause a malfunction.
Ensure that no foreign matter such as chips and wire-offcuts enter the module.
Foreign matter can cause a fire, failure or malfunction.
Do not disassemble or modify the module.
Doing so can cause a failure, malfunction, injury or fire.
Do not touch the conductive and electronic parts of the module directly.
Doing so can cause the module to malfunction or fail.
Do not drop the module or give it hard impact since its case is made of resin. Doing
so can damage the module.
4
