Mitsubishi HS-U577, Руководство пользователя

Страница: 19 / 64

17
4 Press ENTER to select the correct code for your satellite receiver.
Manufacturer Code
RCA or GE 1
PRIMESTAR ® 2
Sony 3
DISH Network 4
Toshiba 5
Panasonic 6
Hughes 7
none OFF
5 After you have selected, press MENU twice to exit the menus.
IMPORTANT
After you have connected the satellite receiver and set the
brand code, you need to see if your VCR can control your
satellite receiver. To do this, use CHANNEL or number
buttons on the VCR remote to tune to a satellite channel.
If the satellite channels appears on you TV, then your VCR
can control your satellite receiver.
Adding and Deleting Channels
If necessary, you can manually add or delete channels after you
have completed the automatic channel memorizing. You cannot do
this for channels coming from a satellite receiver.
1 Make sure that video mute is ON. See page 46.
2 Set the VCR’s input to tuner. To do this, press INPUT on the
remote control until a channel number appears on the screen.
3 Press MENU on the remote control. VCR Main Menu appears.
4 Press the ADJUST buttons on the remote control to select First
Time Set-Up. Press ENTER.
5 You will see the First Time Set-Up menu. Press the ADJUST
buttons to select Add/delete channels. Press ENTER.
IMPORTANT
If you are recording, playing back a tape, receiving a video
signal from an external input, or watching a satellite
receiver channel, then Not available will flash on-screen.
To correct this, stop the tape or turn off the menus and
switch the VCR’s input to tuner.
6 You will see the screen for adding or deleting channels. Use
the ADJUST buttons to select the channel that you want to add
or delete. Press ENTER to add the channel; press CANCEL to
delete it.
7 When you are finished adding or deleting channels, press
MENU three times to exit the menus.
IMPORTANT
If you use automatic memorizing again, you will lose all of
the manual changes you made. All of the channels you
deleted will be added; all of the channels you added will be
deleted. If your cable box receives only one or two digit
channels, you cannot add a three-digit channel.
Setting Up Your VCR
«Add/delete channels
Channel 39
Not in memory
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to add
† ∑ ππADJUST to select
≠πππππCANCEL to delete
ƒFirst Time Set-Up
Your choices are
≈Set the clock
∆Memorize channels
«Add/delete channels
±Sat.receiver (OFF)
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select