29
5
Day will flash. Press the ADJUST buttons to choose the day
on which you want to record; for example, Monday the 12th.
Your choices are:
• a single day up to one month away
• every day from Monday through Friday; for example, to
tape a soap opera. To program, press the ADJUST
buttons until Monday-Friday appears.
• the same day every week; for example, to tape your favorite
weekly sitcom. To program, press the ADJUST buttons until
Every and the desired day of the week appears.
Press ENTER once you have made your choice.
6
The hour numbers of the start time will flash. Press the
ADJUST buttons to set the hour when recording is to start.
Press ENTER.
7
The minute numbers of the start time will flash. Press the
ADJUST buttons to set the minutes when recording is to start.
Press ENTER.
8
Set the stop time the same way as the start time, using steps
6
and
7
.
9
Press the ADJUST buttons to set the recording speed:
SP = standard play; EP = extended play; AUTO = auto.
Auto
speed programming
is discussed on page 34. Press ENTER.
IMPORTANT
If you press ENTER when you set the timer recording
incompletely, Program is not completed will appear on your
screen.
If two programmed recording times overlap, VCR is
already programmed for that time will display on your
screen for about 3 seconds, and then the Recap screen
will appear. The program you have just set will flash for 3
seconds and the start time and the stop time will be shown
in red letters. The start and stop time of the overlapped
program will be highlighted in red color. You will need to
erase one of them.
10
The programmed memory will appear on the Recap screen.
“
S
” next to the channel number indicates satellite channels.
11
To program additional recording times, select an empty
program line by pressing ADJUST buttons. Press ENTER.
The VCR gold Plus+ Program to record menu will appear.
Continue the programming procedure from step
3
.
12
When you are finished with all programming, check the
following:
• If you have a cable box, a digital cable box, a
PRIMESTAR
®
or a DISH Network
™
satellite receiver, leave
the cable box or receiver turned ON.
• If your VCR does not control your cable box, leave the box
tuned to the station you wish to record.
• Turn the VCR power OFF and make sure the programmed
recording light is lit.
¬Program to record
ƒChannel 2
ƒDay Monday 12
ƒStart time 11:00am
ƒStop time 1:30pm
ƒRecord speed
SP
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
Recap screen
¬Program to record
CH DAY ON OFF
10 TH15 9:00pm 10:30pm SP
§
2 MO12 11:30am 1:30pm SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
¬Program to record
ƒChannel 2
ƒDay
Monday 12
ƒStart time --:--
ƒStop time --:--
ƒRecord speed AUTO
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
¬Program to record
ƒChannel 2
ƒDay Monday 12
ƒStart time
11:00am
ƒStop time --:--
ƒRecord speed AUTO
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
Timer Recording
