30
IMPORTANT
When programmed recording of 4 and under are
entered, only 4 of the 8 program lines appear on the
Recap screen at any one time. To see additional
program lines, press the ADJUST buttons to scroll the
lines on the screen.
Canceling a recording in progress
There are two ways to cancel a recording in progress:
Press STOP. The recording stops, but the program is not
cancelled. Therefore, if you press REC, the recording
will start again.
Press POWER on the front panel. The recording stops
and the program is cancelled.
Changing while programming
To change one of your settings (such as start time) while you
are programming:
Press ENTER to move forward through the program list.
Press CANCEL to move backward.
Then use the ADJUST buttons to change the setting.
You will cancel the entire program if you press CANCEL while
the channel number is flashing.
Quick Program
Quick Program is an exclusive Mitsubishi feature that
simplifies the process of programming your VCR to record.
When you press QUICK PROGRAM/VCR Plus+ on the
remote control, you will immediately see the VCR gold Plus+
Program menu and can begin programming right away.
You can use this feature even when the VCR is stopped,
playing, recording, fast forwarding, rewinding, or off. (Quick
program does not work while using OTR
2
.)
1
Press QUICK PROGRAM/VCR Plus+ on the remote
control. If the VCR is off, it will turn on. After tuning your
TV to the correct channel or input, VCR gold Plus+
Program menu will appear.
IMPORTANT
If the VCR memory is full, Program memory is full will
appear for 3 seconds, and then the Recap screen will
appear. Use CANCEL to erase an entry before you
can add another one.
POWER
2
1
3
5
4
6
8
7
9
0
X 2
STOP
STOP
Programming not cancelled
Programming cancelled
2
1
3
5
4
6
8
7
9
0
X 2
QUICK PROGRAM
¬VCR gold plus+ Program
Use number keys to enter
the PlusCode number
--------
or press ENTER to program.
Press MENU to go back.
Timer Recording
8
7
9
0
ADJUST
ADJUST
ENTER
CANCEL
forward
backward
adjust
X 2
