Mitsubishi DX-VS1, Руководство пользователя

Страница: 57 / 74

DX-VS1UE User’s Manual
56
9) Sensor Input Configuration
This page is used to set sensor input
status. This is related with E-mail and
FTP function and Alarm preset func-
tion.
(1) Device Type for Input Ports
Administrator defines active state of 4
digital input ports. If you connect
normal open type device to input port,
you should select “NO (Normal
Open).” With normal close type de-
vice, you should select “NC (Normal
Close).”
(2) Current State for Input Ports
DX-VS1UE shows current status of the 4 input ports used for connecting with a sensor device. In the
status panel, active state or Non-active state message appears. “Non Active” state means that con-
nected device didn’t detect any event when the ‘Apply’ button was clicked. Though this message is
not updated until you click ‘Apply’ button again, DX-VS1UE keeps receiving status information
from the connected device.
10) Alarm Configuration
This page is used to set conditions for
image recording in event status, so that
DX-VS1UE sends the images through e-
mail or FTP.
(1) Motion Detection Threshold
Administrator sets threshold for motion
detection function. Threshold ‘0’ is the
most sensitive state and ‘900’ is the
dullest state.
(2) Alarm Parameters for E-mail /
FTP Application
Administrator defines the conditions for
recording image to DX-VS1UE, if DX-
VS1UE detects some event through mo-
tion detection function (MD Event) or
external devices (SID1, SID2, SID3, and SID4). DX-VS1UE can record 2 frames for 2 seconds before
the event and 2 frames for 2 seconds after the event as well as 1 frame at the moment of event. The
maximum recording rate is 1 frame per second and the total frames are maximum 5. DX-VS1UE re-
cords the images and sends them through e-mail or FTP according to preset conditions on the
ENGLISH