![background image](http://html.mh-extra.com/html/mitsubishi/4dq3/4dq3_service-manual_1809073018.webp)
(3) End play
>---·
Check the crankshaft for end play, as shown, by
using a thickness gauge at the thrust bearing. If
the limit is reached replace the thrust plate.
Specifications
Unit: mm (in.)
'�
'\,
,
.,
Repair
Item
Standard
limit
Journal width
0.100-0.189
0.3
for thrust
(0.00394-0.007 44) (0.012)
bearing
The end play is due to the difference between the
width of thrust bearing and the dimension
(A)
indicated below:
(4)
Runout
Support the crankshaft as shown and roll it to
measure its deflection with a dial gauge ... Distor
tion" is one-half of the deflection (dial gauge
reading); if it exceeds the standard, reduce it by
bending the crankshaft in a press.
Specifications
Unit: mm (in.)
Item
Standard
Repair
limit
Crankshaft runout
0.02
0.05
(0.0008), max (0.0020)
Checking crankshaft end play
_J
0
J8800
Journal width for thrust bearing
Checking crankshaft for runout