ENGINE <4D5-Step
III
> -
Cylinder Head Gasket
11-14
5. Tighten the cylinder head bolts according to the following
procedure (angle-tightening procedure.)
(1) Use the special tool to tighten the cylinder head bolts
in the order of the illustrated numbers to 29
±
2 N·m.
(2) Place the special tool in a wrench to tighten the
cylinder head bolt in the order of the illustrated
numbers to 120
_
.
"
C
A
FUEL INJECTION PIPE INSTALLATION
When tightening the nuts at both ends of the fuel injection
pipe, hold the delivery holder (for pump side) and the injection
nozzle assembly (for nozzle side) with a wrench, and tighten
the nuts to the specified torque.
Tightening torque: 30
±
6 N·m
"
D
A
RADIATOR UPPER HOSE CONNECTION
To reuse the radiator upper hose, align the mating marks
that were made during removal, and then install the hose
clamp.
16
9
MD998051
Front of engine
18
17
15
13
12
11
10
8
7
6
5
4
3
2
1
14
16
9
MD998051
Front of engine
18
17
15
13
12
11
10
8
7
6
5
4
3
2
1
14
MB991614
