Mitsubishi MOTORS Lancer Evolution VIII 2003, Техническое руководство

Страница: 106 / 368

FUNCTIONS AND CONTROL OF SWS ECUS
SIMPLIFIED WIRING SYSTEM (SWS)
54B-11
The front-ECU determines the intermittent time TI from the
input SWS data signal, and turns ON the windshield wiper drive
signal. When the wiper is at the STOP position, the windshield
wiper auto-stop signal goes OFF to turn OFF the windshield
wipe drive signal. After the intermittent time TI seconds from
when the windshield wiper drive signal turned ON, the wind-
shield wiper drive signal is turned ON again and the above
operation is repeated.
.
Mist wiper control
When the ignition switch is at the ACC or ON posi-
tion, if the windshield mist wiper switch of the column
switch is turned ON, the front-ECU turns ON the
windshield wiper drive signal. At the same time, the
wiper speed switching relay is turned ON (HIGH-
SPEED). While the windshield mist wiper switch is
ON, the windshield wiper will operate at high speed.
Then, if the windshield mist wiper switch is turned off,
the wiper operates at low speed until it stops at the
predetermined park position. When the windshield mist switch is turned on briefly,
the wiper operates at low speed once.
At the point the windshield mist switch is turned ON,
if the windshield wiper has been operating intermit-
tently, the same operations as the above will be per-
formed while the windshield mist wiper switch is ON.
After the windshield mist wiper switch goes OFF, the
intermittent operations will be set again TI seconds
after the windshield wiper auto-stop signal is turned
ON last.
.
AC101465AB
ON
OFF
ON
OFF
WINDSHIELD
WIPER
AUTO-STOP
SIGNAL
WINDSHIELD
WIPER DRIVE
SIGNAL
TI TI TI
AC005436AB
ON
OFF
ON
OFF
ON
OFF
ON (HIGH)
WINDSHIELD MIST WIPER
SWITCH
WINDSHIELD WIPER AUTO-
STOP SIGNAL
WINDSHIELD WIPER DRIVE
SIGNAL
WINDSHIELD WIPER
SPEED SWITCHING
RELAY
OFF (LOW)
WHEN WINDSHIELD
WIPER SWITCH IS OFF WHEN WINDSHIELD INTERMITTENT
WIPER IS OPERATING
TI: INTERMITTENT WIPER INTERMITTENT TIME
TI TI