Mitsubishi MOTORS i-MiEV, Руководство пользователя

Страница: 169 / 297

Bluetooth® 2.0 interface (if so equipped)
5-60 Features and controls
5
6. The voice guide will say “Please say a 4-
digit pairing code.” Say a 4-digit number.
When the confirmation function is on, the
system will confirm whether the number
said is acceptable. Answer “Yes.”
Answer “No” to return to pairing code
selection.
7. The voice guide will say “Start pairing
procedure on the device. See the device
manual for instructions.” Enter in the
Bluetooth
®
device the 4-digit number you
have registered in Step 6.
8. The voice guide will say “Please say the
name of the device after the beep.” You
can assign a desired name for the Blue-
tooth
®
device and register it as a device
tag. Say the name you want to register
after the beep.
9. The voice guide will say “Pairing com-
plete,” and the pairing process will end.
N00565101123
If multiple paired Bluetooth
®
devices are
available in the vehicle, the cellular phone or
music player most recently connected is auto-
NOTE
 If 7 devices have already been paired, the
voice guide will say “Maximum devices
paired” and then the system will end the
pairing process. To register a new device,
delete one device and then repeat the pairing
process.
(Refer to “Deleting a device” on page 5-60.)
NOTE
 Some Bluetooth
®
devices require a specific
pairing code. Please refer to the device man-
ual for pairing code requirements.
 The pairing code entered here is only used
for the Bluetooth
®
connection certification.
It is any 4-digit number the user would like
to select.
Remember the pairing code as it needs to be
keyed into the Bluetooth
®
device later in the
pairing process.
Depending on the connection settings of the
Bluetooth
®
device, this code may have to be
entered each time you connect the Blue-
tooth
®
device to the Bluetooth
®
2.0 inter-
face. For the default connection settings,
refer to the instructions for the device.
NOTE
 Depending on the device, it might take a few
minute to pair the Bluetooth
®
device with
the Bluetooth
®
2.0 interface.
 If the Bluetooth
®
2.0 interface cannot recog-
nize the Bluetooth
®
device, the voice guide
will say “Pairing has timed out” and the pair-
ing process will be cancelled.
Confirm that the device you are pairing sup-
ports Bluetooth
®
, and try pairing it again.
NOTE
 If you enter the wrong number, the voice
guide will say “Pairing failed” and the pair-
ing process will be cancelled.
Confirm the number is right, and try pairing
it again.
NOTE
 When the confirmation function is on, after
repeating the device tag you have said, the
voice guide will ask “Is this correct?”
Answer “Yes.”
To change the device tag, answer “No” and
then say the device tag again.
Selecting a device
NOTE
BK0220400US.book 60 ページ ２０１４年１１月１８日 火曜日 午前７時２７分