Mitsubishi MOTORS i-MiEV, Руководство пользователя

Страница: 142 / 297

Tire pressure monitoring system
Features and controls 5-33
5
The tire pressure monitoring system may not
work normally in the following circum-
stances:
 A wireless facility or device using the
same frequency is near the vehicle.
 Snow or ice is stuck inside the fenders
and/or on the wheels.
 The tire inflation pressure sensors’ battery
is exhausted.
 Wheels other than Mitsubishi Motors gen-
uine wheels are being used.
 Wheels that are not fitted with tire infla-
tion pressure sensors are being used.
 Wheels whose ID codes are not memo-
rized by the vehicle are used.
 A window tint that affects the radio wave
signals is installed.
N00532900182
If you use new wheels with new tire inflation
pressure sensors, their ID codes must be pro-
grammed into the tire pressure monitoring
system. Have tire and wheel replacement per-
formed by a certified i-MiEV dealer to avoid
the risk of damaging the tire inflation pres-
sure sensors.
N00533000207
Your tire pressure monitoring system oper-
ates on a radio frequency subject to Federal
Communications Commission (FCC) Rules
(For vehicles sold in U.S.A.) and Industry
Canada Rules (For vehicles sold in Canada).
This device complies with Part 15 of the FCC
Rules and RSS- Gen of the Industry Canada
Rules.
Operation is subject to the following two con-
ditions.
 This device may not cause harmful inter-
ference.
 This device must accept any interference
received, including interference that may
cause undesired operation.
 Do not use an aerosol puncture-repair spray
on any tire. Such a spray could damage the
tire inflation pressure sensors.
 Using the tire repair kit may damage the tire
inflation pressure sensor. The vehicle must
promptly be inspected and repaired by a cer-
tified i-MiEV dealer after using the tire
repair kit.
NOTE NOTE
 Tire inflation pressures vary with the ambi-
ent temperature. If the vehicle is subjected to
large variations in ambient temperature, the
tire inflation pressures may be under-inflated
(causing the warning light to come on) when
the ambient temperature is relatively low. If
the warning light comes on, adjust the tire
inflation pressure.
Whenever the tires and wheels
are replaced with new ones
CAUTION
 The use of non-genuine wheels will prevent
the proper fit of the tire inflation pressure
sensors, resulting air leakage or damage of
the sensors.
General information
CAUTION
 Changes or modifications not expressly
approved by the manufacturer for compli-
ance could void the user’s authority to oper-
ate the equipment.
BK0220400US.book 33 ページ ２０１４年１１月１８日 火曜日 午前７時２７分