Mitsubishi Fuso CANTER Скачать руководство пользователя страница 400

Страница: 400 / 467

12-98

Simple inspection and service

•

The dump trucks have different tread pat-

terns on the front and rear wheels. Set tires

with a ribbed tread for the front wheels and

tires with a traction-type tread for the rear

wheels.

Over time, the spare tire leaks air little by little.

Therefore, the tire pressure should be kept a little

high.

1 Inspection of spare wheel

Kick the spare tire lightly to check whether it is

securely retained. If it moves, raise it to hold it in

place.

2 To use

Insert spare tire handle into spare tire carrier

and turn it counterclockwise to lower spare wheel

. When using the multi-part spare wheel handle

, fit the longer pin of the attachment onto the

spare wheel handle.

3 To stow

1. Face up the outer side of the disc wheel and

position hanger plate as illustrated.

2. Turn the spare wheel handle clockwise to raise

the spare wheel.

CAUTION

•

When raising the spare wheel, make sure the

chain is not twisted and that the hanger

plate is in the correct position. After raising

the spare wheel, make sure there is clearance

between the spare wheel and nearby parts

and that the spare wheel is not loose. Unless

the spare wheel is properly mounted, it may

fall off while the vehicle is moving, resulting

in an accident.

•

When raising the spare wheel, align it such

that the tire valve does not touch the hanger.

The tire valve may otherwise get damaged.

Spare tire

Z21574

Z09322

Содержание CANTER




















































































































































































































































































































































































































































































Результаты поиска

Содержание CANTER

Отзывы:

Похожие инструкции для CANTER

Бренды по названию

Популярные бренды

Mitsubishi Fuso CANTER, Руководство пользователя

Результаты поиска

Содержание CANTER

Отзывы:

Похожие инструкции для CANTER

Бренды по названию

Популярные бренды