Mitsubishi Fuso CANTER, Руководство пользователя

Страница: 361 / 467

12-59
4. Using pliers or other suitable tool, slightly turn
the fuel filter’s drain plug counterclockwise to
let water inside the filter drain out.
5. If only fuel starts flowing out, tighten the drain
plug by turning it clockwise.
6. Turn the starter switch to “ON” position for 30
seconds to bleed the fuel system.
7. Start the engine and check that fuel does not
leak. It may take up to 30 seconds to start the
engine.
NOTE:
Air enters the fuel system while replacing the filter
element and will prevent the engine from starting.
When first starting the engine after replacing the fil-
ter element, hold the starter switch in the “ON” posi-
tion for 30 seconds to bleed air out of the system
and then crank the engine.
Tightening torque 1.5 N·m (0.15 kgf·m)
WARNING
•
The drain contains not only water but also
fuel.
Be sure to wipe clean the surfaces around
the fuel filter to remove all splashed fuel.
Fuel remaining on the surfaces could
cause a fire.
•
Make sure fuel does not leak from the filter
or from related parts. Any fuel leakage
could cause a fire.
Z21454