Mitsubishi Electric WD-60735 Скачать руководство пользователя

Страница: 5 / 45

1. Television Overview

Front-Panel Indicators

LAMP Indicator

LED Color TV Condition

Additional Information

None

Normal TV on or standby condition.

Normal operation.

Green

TV just powered off and lamp is
cooling.

Starts to blink 60 seconds after turning off TV. TV can be turned
back on before blinking starts or after blinking stops, but not
while the indicator is blinking. Normal operation.

Yellow

1. Lamp access door is open or

not secure.

TV will not operate until lamp access door is secure. See
Appendix E for installation information.

2. No lamp installed.

TV will not operate without a lamp. See Appendix E for installa-
tion information.

Red

Lamp no longer illuminates and has
reached the end of the lamp life.

Replace the lamp. The TV will not operate when the lamp no
longer illuminates. See Appendix E for installation information.

Off

Steady On

Slow Blinking

Fast Blinking

TV Back Panel

1. ANT 1/ANT 2 (Antenna)

If you are connecting an antenna or direct cable service
without a cable box, connect the main antenna or cable
source to

ANT 1

. Use

ANT 2

for a second source.

ANT 1

and

ANT 2

can each receive digital and analog

over-the-air channels from a VHF/UHF antenna or non-
scrambled digital/analog cable source.

2. AVR AUDIO OUTPUT

Use

AVR AUDIO OUTPUT

to send analog audio of the

program currently shown on the screen to an analog

A/V surround sound receiver or stereo system. Digital

audio from digital channels and HDMI devices is con-
verted to analog audio by the TV. This is the only audio
connection needed between it and the TV if using an
analog A/V receiver or stereo system.

3. DIGITAL AUDIO OUTPUT

This output sends Dolby Digital or PCM digital audio to

your digital A/V surround sound receiver. Analog audio
from analog channels and devices and HDMI devices is
converted by the TV to PCM digital audio. If you have

a digital A/V receiver, in most cases this is the only
audio connection needed between the TV and your A/V
receiver.

4. Composite Video (INPUT 1, INPUT 3)

Use the

VIDEO

jacks to connect a VCR, DVD player,

standard satellite receiver, or other A/V device to the

TV. Use the adjacent

AUDIO R

and

inputs for

INPUT

INPUT 3

if you wish to send audio to the TV. Note

that the

INPUT 3

composite video jack is automatically

disabled when you connect to

S-VIDEO

(item 6).

5. Component Video (INPUT 1, INPUT 2)

Y Pb Pr Component Video (480i/480p/720p/1080i)

Use these jacks to connect devices with component
video outputs, such as DVD players, external HDTV
receivers, or compatible video game systems. Use the
adjacent

AUDIO R

and

jacks for

INPUT 1

INPUT 2

if you wish to send audio to the TV. See Appendix A
specifications for signal compatibility.

STATUS Indicator

LED Color TV Condition

Additional Information

None

Normal TV on or standby condition. Normal operation.

Yellow

TV is too hot.

The TV will display a warning message and shut off if it overheats.

• Ambient room temperature may be too high. Turn off the TV

and let the room temperature to drop.

• Clear blocked air vents. Ensure at least a four-inch clear

ance on all sides of the TV.

• Clean the lamp-cartridge air filter. See Appendix E.

Red

TV may require service.

Turn off the TV and unplug the set from the AC power source.
Wait one minute and then plug the set back in. See Appendix D.
If the LED is still on, contact your dealer or a Mitsubishi Autho-
rized Service Center. Go to www.mitsubishi-tv.com or call
1-800-332-2119 to receive Authorized Service Center information.

POWER/TIMER Indicator

LED Color TV Condition

Additional Information

None

TV is powered off.

Normal operation.

Green

TV is powered on.

Normal operation.

Green

TV powered off, auto-on timer is set. Normal operation. TV can be turned on at any time.

Green